K Series of Amplification
The K series is developed for the pursuit of excellent sound quality with high density of power. Equipped with pure copper heavy-duty toroidal transformer power supply, and assembled with high quality electronic elements, K series can work stable at 2 ohm load with no sound distortion. Combined with dynamic power supply PWM modulation technology, K series can perform to the need of high requirements in efficiency and quality.
K1300
1300W x2 @8ohm, 2100 x2 @4ohms, 3300 x2 @2ohms, 4200 x1 @8ohms bridged and 6600 x1 @4ohms bridged
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
K1600
1600W x2 @8ohm, 2600 x2 @4ohms, 4200 x2 @2ohms, 5200 x1 @8ohms bridged and 8400 x1 @4ohms bridged
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Amplifier Module
1600W x2 @8ohm, 2600 x2 @4ohms, 4200 x2 @2ohms, 5200 x1 @8ohms bridged and 8400 x1 @4ohms bridged
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Pure copper heavy-duty toroidal transformer power supply
Class TD power module
DIP elements in power modules
Excellent heat radiation and 90% high efficiency
High-quality pure copper transformer
High-capacity and low-impedance transistors
Low physical “Buzzing” noise from seamless copper wires
High dynamic range and low distortion, sound transparent and extensive
World famous brand electronic elements
Multiple protection features: Output Short Circuit/Overload/DC/over HF/Over Temp. etc.
Channel independent power and SIG/-5/-10/-15/-20dB/CLIP/TEMP/PROT indicators on front panel
Neutrik OUTPUT/INPUT/LINK connectors
XLR input and signal link connectors
SpeakON NL4 and binding post output connectos
SpeakON NL4 and binding post output connectos
Routing mode selector (stereo/bridge-parallel) with status indicator on the rear panel
Input sensitivity selector on rear panel(32dB/1v/0.775v)
Ground ON/OFF switch on rear panel
20A circuit breaker on rear panel
Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Toroidal Transformer
System Protection
Sound Characteristic
Quality Assurance
K series reflect the pursuit of excellence in every detail
of the product. Our philosophy throughout all aspects
of product design, manufacturing, assembly, packaging
and testing. Each accessories are based on the highest
standards of quality and carefully selected. Adopting
advanced PWM modulating SMPS technology, high
efficiency and low distortion. Separated power module
for each channels and carefully selected DIP accessories
makes it a remarkable stable amplifier.
of the product. Our philosophy throughout all aspects
of product design, manufacturing, assembly, packaging
and testing. Each accessories are based on the highest
standards of quality and carefully selected. Adopting
advanced PWM modulating SMPS technology, high
efficiency and low distortion. Separated power module
for each channels and carefully selected DIP accessories
makes it a remarkable stable amplifier.
Power Supply
Component Brands
Model | K1300 | K1600 |
|---|---|---|
8Ω Stereo ∗ | 1300W x2 | 1600W x2 |
4Ω Stereo ∗∗ | 2100w x2 | 2600w x2 |
2Ω Stereo ∗∗ | 3300w x2 | 4200w x2 |
8Ω Bridged ∗∗ | 4200w x1 | 5200w x1 |
4Ω Bridge ∗∗ | 6600w x1 | 8400w x1 |
All Channels driven output power, THD=1% |
Other Specifications | K1300 | K1600 |
|---|---|---|
THD+N, | 0.05% (THD at 1kHz and 1dB below clipping) | |
Frequency response, | 20hz - 20Khz (+0/-0.5dB, 1/4W into 8 ohms) | |
S/N rate, | 95dB | |
Damping factor,(1kHz) | 300 (8ohm load, 1kHz and below) | |
Siew Rate | 35V/uS | |
Channel seperation | 70dB (8ohm load, 1kHz and below) | |
Amplifiers gain selectable | 0.775v / 1v / 32dB | |
Default gain | 42.3dB | 43.3dB |
Classification | Class D+AB∗∗ | |
Cooling, | Air flow front to rear | |
Protection | Soft start, VHF, DC, Short circuit, Clip limit, Over heat, Progressive volume |
Led and Function | K1300 | K1600 |
|---|---|---|
Front panel indicator | Working state, Voltage, clip limit, Protect, temp | |
Rear panel indicator | Bridge selector indicator | |
Front Panel | Power switch, gain control | |
Rear Panel | Stereo, parallel, Bridge, Gain switch, Ground switch |
Connection | K1300 | K1600 |
|---|---|---|
Input connectors (per ch.) | 3 pin XLR electronically balanced | |
Output connectors (per ch.) | NL4 Speakon, or binding posts |
Size / Packaging | K1300 | K1600 |
|---|---|---|
Product dimensions (mm) | 483 x 501 x 89 | |
Packing dimensions (mm) | 620 x 590 x 185 | |
Weight (kg) | 32kg | 33.5kg |
Mains power | (AC 220v / 50Hz ±10% |
1 ∗Measured by pulse signal
2 ∗∗Class D +AB PWM Modulate power supply +class AB Analog topology enures the circuit of the high efficiency and low distortion
3 The Amplifiers PSU operates as a non resistive load, So the calculation "Volts x Amps = Watts" Would not be correct
4 All specifications are subject to change without notice.
2 ∗∗Class D +AB PWM Modulate power supply +class AB Analog topology enures the circuit of the high efficiency and low distortion
3 The Amplifiers PSU operates as a non resistive load, So the calculation "Volts x Amps = Watts" Would not be correct
4 All specifications are subject to change without notice.