CD Series of Amplification

CD series power amplifier is the flagship series of four channel amplification. Powered by SMPS modules, CD series is designed as touring grade amplifiers, delivering solid reliability and good sonic quality. Up to 10 pieces of large-capacity capacitors ensure 10,000 power output, 4 Channel amplifier with up to 2500W from each channel. Extraordinary power density and distortion-free sound performance make CD series be first choice for touring applications.

CD6000

800Wx4 @8ohm, 1300 x4 @4ohms, 1500 x4 @2ohms,
2600W x2 @8ohms bridged and 3000W x2 @4ohms bridged
Switch Mode Power Supply
High efficiency ClassTD output stage delivers ClassAB audio quality with ClassD efficiency
Comprehensive protection scheme including current, voltage, DC, temperature, short-circuit and over-load warnings
High quality electronic elements for superior sonic quality
Solid stability at continuous full power at 2 ohms
XLR input and signal link connectors
Speakon NL4 and binding post output connectors
Input sensitivity selector on rear panel(0.775V/1V/32dB)
Routing mode Selectors on rear panel(Stereo/Bridge/Parallel)
Channel independent PRTO/TEMP/CPL/CLIP/-5/-10/-20/SIG/POWER LED indicators on front panel
BRG and PAR indicators on front panel
2U rack mount chassis and low unit weight for durability touring applications
2 years warranty
Black and silver color front panel available

Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation

CD8000

1300Wx4 @8ohm, 2100 x4 @4ohms, 2500 x4 @2ohms,
4200W x2 @8ohms bridged and 5000W x2 @4ohms bridged
Switch Mode Power Supply
High efficiency ClassTD output stage delivers ClassAB audio quality with ClassD efficiency
Comprehensive protection scheme including current, voltage, DC, temperature, short-circuit and over-load warnings
High quality electronic elements for superior sonic quality
Solid stability at continuous full power at 2 ohms
XLR input and signal link connectors
Speakon NL4 and binding post output connectors
Input sensitivity selector on rear panel(0.775V/1V/32dB)
Routing mode Selectors on rear panel(Stereo/Bridge/Parallel)
Channel independent PRTO/TEMP/CPL/CLIP/-5/-10/-20/SIG/POWER LED indicators on front panel
BRG and PAR indicators on front panel
2U rack mount chassis and low unit weight for durability touring applications
2 years warranty
Black and silver color front panel available

Applications
Mid and big size high-end installation applications Venues with high sound quality and power density requirements Subwoofer amplification on continuous full-power operation
Amplifier Module
Combining class D amplifier output modilation and Class A/B analog amplifier to pro'vide accurate and efficient dynamic power, it ensure's the high efficiency of energy convention and high-quality analog signal amplification, perfectly blend of high efficiency and pure

sound quality is this series. The CD series is fully bridgeable, and maintain's a flat responce in 2ohm loading

SMPS Module
System Protection
Sound Characteristics

Embracing high dynamic range and low distortion in amplification, clear high frequency, warm mids and powerful sub.

Quality Assurance
Component Brands

Model

CD6000

CD8000

8Ω Stereo ∗
800W x4
1300W x4
4Ω Stereo ∗∗
1300w x4
2100w x4
2Ω Stereo ∗∗
1500w x4
2500w x4
8Ω Bridged ∗∗
2600w x2
4200w x2
4Ω Bridge ∗∗
3000w x2
5000w x2
All Channels driven output power, THD=1%

Other Specifications

CD6000

CD8000

THD+N,
0.05%
Frequency response,
20hz - 20Khz, +0/-1.5dB
S/N rate,
95dB
Damping factor,(1kHz)
800
Inputs CMRR(1 kHz)
70dB
Input sensitivity,
0.775v / 1v / 32dB
Input impedance
(baI/unbaI) 20Kohms/10Kohms
Voltage gain,
38dB
40.2dB
Classification
Class D+AB**
Cooling,
Air flow front to rear
Protection
Channel independent temperature, protection, VHF and clip warning indicators on the front panel

Features

CD6000

CD8000

Routing mode
selector on the back panel (stereo / bridge / parallel).
Channel independent
Temperature, protection and clip warning indicators on the front panel.
Channel independent
power and -5dB / -10dB / -20dB / signal presence, indicators on the front panel

Connection

CD6000

CD8000

Input connectors (per ch.)
XLR input and signal link connectors
Output connectors (per ch.)
NL4 output connectors.

Size / Packaging

CD6000

CD8000

Product dimensions (mm)
483 x 451 x 89
Packing dimensions (mm)
595 x 565 x 170
Weight (kg)
15kg
15.7kg
Mains power
(AC 220v / 50hz ±10%
* Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
** Power tested under the condition of 20ms burst, 1KHz sine wave and 1% THD.
© 2021 All Rights Reserved. Powered by Elements Audio