
18 Sound 5W430 5"8ohm LF Ferrite Driver
89 dB SPL 1W / 1m average sensitivity
25,4 mm (1 in) copper voice coil
120W program power handling
Superb frequency range
Weather protected cone
Ideal for compact two way and multiway systems
The 5W430 is a 5 inch woofer designed for low frequency reproduction in 2-way systems or multiway systems where high intelligibility is required. The speaker has been specifically designed for compact reflex enclosures. It is also currently used in line array or multiway systems with excellent results. The 25.4 mm ( one inch) voice coil is made from copper wire and assures linearity and consistent power handling. The polypropilene cone and half roll rubber suspension makes the transducer suitable for outdoor use in adverse weather conditions.
GENERAL SPECIFICATIONS
Nominal Diameter 125mm (5 in)
Rated Impedance 8 Ohm
AES Power 80 W
Program Power 120 W
Peak Power 250 W
Sensitivity 89 dB
Frequency Range 60 ÷ 8000 Hz
Power Compression @-10dB 0,8 dB
Power Compression @-3dB 2,0 dB
Power Compression @Full Power 3,3 dB
Max Recomm. Frequency 4000 Hz
Recomm. Enclosure Volume 8 ÷ 20 lt. (0.28 ÷ 0.71cuft)
Minimum Impedance 6,5 Ohm at 25°C
Max Peak To Peak Excursion 16 mm (0,63in)
Voice Coil Diameter 25 mm (1 in)
Voice Coil Winding Material copper
Suspension Half roll Rubber
Cone Polypropilene
THIELE SMALL PARAMETERS
Fs 52 Hz
Re 5.4 Ohm
Sd 0,009 sq.mt. (13.95 sq.in.)
Qms 2.77
Qes 0.36
Qts 0.32
Vas 15 lt
Mms 8,2 gr
BL 6.3 Tm
Linear Mathematical Xmax ± 6 mm (±0,24 in)
Le (1kHz) 0.49 mH
Ref. Efficiency 1W@1m (half space) 89.6 dB
MOUNTING INFORMATION
Overall diameter 134 mm (5.28 in)
N. of mounting holes 4
Mounting holes diameter 4,5 mm (0,18 in)
Bolt circle diameter 140 mm (5.51 in)
Front mount baffle cutout ø 124 mm (4.88 in)
Rear mount baffle cutout ø 123 mm (4.84 in)
Total depth 72 mm (2,83 in)
Flange and gasket thickness 4,5 mm (0,18 in)
Net weight 1,24 kg (2,73 lb)
Shipping weight 1,8 kg (3,97 lb)