Amplifier Module
Combining class D amplifier output modulation and Class A/B analog amplifier to provide accurate and efficient dynamic power, it ensures the high efficiency of energy conversion and high-quality analog signal amplification, perfectly blend of high efficiency and pure sound quality is this series. The CD series is fully bridgeable, and maintains a flat response in 2ohm loading.

SMPS Module
Lossless absorption of fly back SMPS topologies, more suitable for large dynamic amplification. Up to 10 large-capacity capacitors are used to meet the maximum 10,000 watts of power output, This ensures that the four channels simultaneously have a strong power allowance, it ensure the full power output and distortion-free sound even with a significant decrease of voltage.

System Protection
This product uses a short-circuit protection, high frequency protection, over temperature-protection, DC protection, overload protection, as well as average power limit (Pal), PAL effectively monitors the power output and power input. In case of emergency it limits the current, to prevent audio interruption. Protection function is independently distributed to each channel.

Sound Characteristic
Embracing high dynamic range and low distortion in amplification, clear high frequency, warm mid range and powerful sub.

Quality Assurance
CD series reflects the pursuit of excellence in every detail of the product. Our philosophy throughout all aspects of product design, manufacturing, assembly, packaging and testing. Each component is selected based on the highest standards of quality and carefully selected.

Component Brands
SANKEN, IXYS, LELON, ELNA, NEUTRIK,


Technical Specifications

CD6000

Max. Output Power
800W* x4 @8ohm
1300W** x4 @4ohm
1500W** x4 @2ohm
2600W** x2 @8ohm bridge
3000W** x2 @4ohm Bridged

All channels driven output power, THD=1%

Specifications
THD+N 0.05% (THD at 1Khz and 1db below clipping)
Frequency response 10hz - 32Khz, (+0/-0.5dB 1/4 w into 8 ohm)
S/N rate 95dB
Damping factor,(1kHz) 800 (8ohm load, 1Khz and below)
Inputs CMRR(kHz) 70dB
Input sensitivity 0.775v/1v/32dB
Input impedance (bal/unbal) 20Kohms/10Kohms
Voltage gain 40.2dB
Classification Class D+AB**
Cooling Air flow front to rear
Weight 15.7kg


Features
Routing mode selector on the back panel (stereo / bridge / parallel).
Channel independent Temperature, protection and clip warning indicators on the front panel.
Channel independent Power and -5dB / -10dB / -20dB / signal presence, indicators on the
front panel.
Cooling Four fans, front to rear airflow, temperature controlled speed.

Protection Channel independent temperature, protection, VHF and clip warning
indicators on the front panel.


Connection
Inputs XLR input and signal link connectors
Outputs Neutrik NL4 output connectors

Size / Packaging
Product dimensions (mm), 483mmx451mmx89mm
Packing dimensions (mm), 595mmx565mmx170mm
Output power (Ac 220V/50Hz.±10%
Gross weight 15.7kg

Remark:
*Power tested under the condition of 40ms burst, 1KHz sine wave and 1% THD.
**Power tested under the condition of 20ms burst, 1 KHz sine wave and 1% THD.
The amplifiers psu operates as a non resistive load, so the calculation volts x ampere = watts would not be correct.